Surface Treatment for Paper Cup Machines: Standard vs. Cutting Corners

April 22, 2026

纸杯机表面处理工艺：正规工艺 vs 偷工减料对比

正规工艺

钢铁件经化学氧化形成均匀黑色保护膜，后续做浸油封闭，防锈、哑光、不反光，多用于内部轴类、齿轮。

Standard Process

Uniform black oxide film formed via chemical oxidation, sealed with oil for anti-rust, matte finish. Used for internal shafts and gears.

常见偷工猫腻

正规工艺

通过电解镀上锌 / 镍 / 铬等，镀层厚度均匀达标，镀前除油除锈，镀后钝化封闭，防锈、耐磨、外观光亮。

Standard Process

Uniform coating (Zn/Ni/Cr) via electrolysis, proper pre-treatment & passivation, good anti-rust & wear resistance.

常见偷工猫腻

正规工艺

钣金先喷砂 / 磷化处理，静电喷粉后高温固化，涂层厚实均匀、硬度高、耐刮、不掉漆。

Standard Process

Sandblasting/phosphating pretreatment, electrostatic spraying + high-temperature curing, tough & durable coating.

常见偷工猫腻

正规工艺

底漆 + 面漆 + 烘干，漆膜饱满、附着力强、防锈美观。

Standard Process

Primer + topcoat + baking, strong adhesion & good anti-rust performance.

常见偷工猫腻