Payment & Shipping Terms:
|Speed:||100-130pcs/min(max 145pcs/min)||Material:||Single Or Double PE Coated Paper|
|Color:||Red||Cup Range:||< 16 Oz|
|Heating System:||Hot Air System (from Switzerland)||Air Compressor:||0.5M^3/min|
|Product Output:||380V,16 KW,50HZ, Three Phase Four Wire||Machine Size:||2500×1800×1700mm|
|Counter Size:||900×900×1760 Mm||Weight:||3.5 Tons|
1. Output is improved: The capaticy is 100-130 pcs/min(max 145pcs/min).
2. Servo motor is used to control the bottom paper feeding, so that the gap between the bottom-paper is controlled within 0.1mm, which can make machine more stable and save raw material. With light eyes under the paper roll,the machine will be stopped when out of bottom-paper, avoiding the waste in paper.
3. Gear drive is adopted to avoid the defect of loose gap of chain drive.
4. We use a self-lubrication system in the machine, which reduces the friction between the parts. And we do not need to add the oil manually. Sometimes worker are not willing to add the oil everyday. In this case the machine can be maintained without manually fueling.
5. This device adopt non-contact multi-point light control switch (such as in paper holder, cup tube ,bottom paper and so on, according to customer demand). It can detect working situation, then achieve a fault alarm preventing machine from collision, makes the machine more stable and longevous.
6. The machine is equipped with gear motor simplifies the complicated system and makes the machine more stable.
Technology Specification for paper cup machine
|MATERIAL||SINGLE AND DOUBLE PE COATED PAPER|
|Paper cup size||<16 OZ|
|Speed||100-130 PCS/MIN(max 145pcs/min)|
|Output||380V/220V, 60HZ/50HZ,THREE PHASE FOUR WIRE|
|Working air source||0.4M3/MIN|
|Paper material||135-450 GRAM|
|Total weight||3.4 TONS|
|Overall dimension||25001800*1700 MM|
Finished Product Range for paper cup
· Top Diameter: 65 - 115mm
· Bottom Diameter: 40 - 90mm
· Total Height: 70 - 190mm
Other sizes upon request
SMD-90 paper cup machine is designed to make both one side & two sides PE coated paper cup for cold and hot drinking.
1. Don't be in an environment of corrosive gas or smoke
2. Don't in the product may be splashed water, oil or use chemicals.
3. Please with stable voltage source power supply
4. make sure the power cord in good condition, so as not to cause fire or shock damage.
5. Instrument after electrify please don't touch input and output terminals, lest cause electric shock or instrument malfunction.
6. if you open the instrument shell, there may be a shock hazard.Because of power, has its internal capacitance charging, can keep certain voltage.